Gelshield 200
	Primers
	Epoxy Primer for Osmosis Protection

PRODUCT DESCRIPTION Quick drying, easy to apply, epoxy primer for protection of GRP against osmosis. * Provides protection against osmosis in five coats (250 µm) * Useable down to 5°C * Fast drying allows multiple coat application in a single day PRODUCT INFORMATION Colour YPA212-Green, YPA213-Grey Finish Matt Specific Gravity 1.4 Volume Solids 45%  Mix Ratio 3:1 by volume (as supplied) , Converter/Curing Agent - YPA214 Typical Shelf Life 2 yrs VOC (As Supplied) 464 g/lt Unit Size 750 ml 2.5 Lt DRYING/OVERCOATING INFORMATION Drying 5°C 15°C 23°C 35°C Touch Dry [ISO] 4hrs 2hrs 1hrs 30mins Immersion 24hrs 18hrs 12hrs 8hrs Pot Life 10hrs 5hrs 3hrs 2hrs Overcoating Substrate Temperature 5°C 15°C 23°C 35°C Overcoated By Min Max Min Max Min Max Min Max B.F.A.  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Cruiser  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Cruiser  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Cruiser Eco/Cruiser Future  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Cruiser Premium  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Cruiser UNO  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs CT Kobberstoff  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Fabi  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Fabi Eco/Waterways Future  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Fabi Skeppsmask / CT Kobber  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Gelshield 200  10hrs  6mths  5hrs  6mths  3hrs  6mths  2hrs  6mths Interspeed  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Interspeed Aqua  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Interspeed Kopervrij  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Interspeed Ultra  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Lago Racing II  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Micron  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Micron 55  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Micron 66  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Micron Eco/Micron Future  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Micron Extra  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Micron Kopervrij  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Micron Optima  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Micron WQ  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Navigator  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Prima  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Trilux  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Trilux (S)  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Trilux 33  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Uni-Pro  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Veridian Tie Coat  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Waterways (Eire Only)  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs Note:If maximum overcoating time is exceeded, sand with 180-220 grade wet or dry paper. APPLICATION AND USE Preparation BARE GRP: Wash down with Super Cleaner, rinse with fresh water and allow to dry. Sand with 180 grade (grit) paper. PREVIOUSLY ANTIFOULED SURFACE: Remove using Interstrip. Wash down with Super Cleaner, rinse with fresh water and allow to dry. Sand with 180 grade (grit) paper. EXPOSED LAMINATE: Patch prime using Gelshield solventless epoxy. Method Remove any dust from the surface. Apply required number of coats, detailed in the specification sheets (minimum 250 microns DFT). For ease, alternate the grey and green colours starting and ending with grey. BILGES: Apply 2 coats only provided there is a gelcoat on the inside of the hull. If no gelcoat, use Gelshield solventless epoxy. Hints Mixing Stir or shake individual components thoroughly. Add Curing Agent to the Base, stir and leave for 10 minutes to allow bubbles to disperse. Thinner YTA061 Thinners No.7 Other Can be used down to 5°C but for maximum performance, temperature should be above 10°C. Some Important Points New hulls must be post-cured for a min. period of 4 weeks before applying Gelshield 200 . Do not apply direct to the exposed laminate. Do not use below 5°C. Ambient temperature should be minimum 5°C/40°F and maximum 35°C/95°F. Product temperature should be minimum 10°C and maximum 35°C. Substrate temperature should be minimum 5°C/40°F and maximum 35°C/95°F. Compatibility/Substrates GRP Gelcoats & cured laminate . It should not be used over any one pack products. Number of Coats 5 minimum by brush (min. 250 µm DFT) Coverage (Theoretical) - 9.10 (m²/lt) by brush (Practical) - 8.10 (m²/lt) by brush Recommended DFT 50 microns dry by brush Recommended WFT 110 microns wet by brush Application Methods Brush, Roller TRANSPORTATION,STORAGE AND SAFETY INFORMATION Storage GENERAL INFORMATION: Exposure to air and extremes of temperature should be avoided. For the full shelf life of Gelshield 200 to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/40°F and 35°C/95°F. Keep out of direct sunlight. TRANSPORTATION: Gelshield 200 should be kept in securely closed containers during transport and storage. Safety GENERAL: Read the label safety section for Health and Safety Information, also available from our Technical Help Line. DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal. Remainders of Gelshield 200 cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities. IMPORTANT NOTES The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability of the product for the intended purpose does so at their own risk and we can accept no responsibility for the performance of the product or for any loss or damage (other than death or personal or injury resulting from negligence) arising out of such use. The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development. , International, the Akzo Nobel logo and other products mentioned in this publication are trademarks of, or licensed to Akzo Nobel. Regional Addresses Head Office International Paint Ltd P O Box 20980 Oriel House 16 Connaught Place London W2 2ZB United Kingdom tel: +44 (0) 171 479 6000 fax: +44 (0) 171 479 6500 European Region International Paint Ltd Stoneygate Lane Felling, Gateshead Tyne & Wear NE10 0JY United Kingdom tel: +44 (0) 191 469 6111 fax: +44 (0) 191 438 3977 Asia Region International Paint Singapore (Pte) Ltd 449 Tagore Industrial Avenue 01-03 Hong Joo Industrial Building Singapore 787820 tel: +65 6453 1981 fax: +65 6453 1778 Australasia Region International Paint 115 Hyde Road Yeronga, Brisbane Queensland 4104 Australia tel: +61 (0) 7 3892 8866 fax: +61 (0) 7 3892 4287 North America Region International Paint LLC 2270 Morris Avenue Union New Jersey 07083 USA tel: +1 (0) 908 686 1300 fax: +1 (0) 908 686 8545 South America Region International Paint Rod Rap tavares, KM 18.5 Predio Administrativo 11 Butanta CEP 05577-300 Sao Paulo, Brazil tel: +55 (0) 11 3789 2000 fax: +55 (0) 11 3789 2200

			Ref: Issue Date: Supersedes:	05000013 12-Oct-2007 10-Sep-2007